Glossary
[A] [B] [C] [D] [E] [F] [G] [H] [I] [J] [K] [L] [M] [N] [O] [P] [Q] [R] [S] [T] [U] [V] [W] [X] [Y] [Z]
A
A/D converter (ADC)
An analog-to-digital converter (ADC) is an electronic device that converts analog audio signals to digital data – ones and zeros. Analog sources may include microphone feeds for vocals and instruments, as well as stereo signals from mixers or other processors. The data can then be stored on a DAW (digital audio workstation) for editing, or sent to a digital recorder.
Active
An active device requires power to operate, as opposed to a passive device that doesn’t need power. Examples include “active crossovers” and “active monitors.”
Amplifier
An electronic device that increases the voltage, current or power of a signal.
Analog
An analog is a representation of something. Analog audio signals use changes in voltage to represent changes in sound pressure. On vinyl records, groove depth is an analog for sound pressure levels. On analog tape, changes in magnetism are an analog for changes in sound pressure. This continuous representation of sound is a key difference between analog and digital systems, which use “quantized,” or sampled representation.
Attenuate
To reduce or make quieter.
B
Balanced signal
A type of audio signal where the signal-carrying circuit uses two conductors, each of which carries the same signal potential but with the polarity of one reversed with respect to the other. Any noise that is induced into the circuit will be common to both “legs” and on arrival at the destination, is cancelled out by combining the out of phase signals. Balanced connectors are generally 3-pin XLR or 1/4″ TRS phone plug.
Banana plug
A connector designed primarily for connecting speaker wire to the binding posts on the back of power amplifiers and speakers.
Band
As it applies to audio, a range of frequencies. For example, a 10-band graphic equalizer has 10 “bands” of frequencies which can be independently adjusted.
Bus
In audio, a bus is a point in a circuit where many signals are brought together. For example, a mixer assigns input signals to a bus, and the bus carries all the signals, mixed together, to an output. There’s a left main output bus, and a right main output bus. There may also be an auxiliary bus, a monitor bus, or an effects bus that carry these designated mixes to where they need to go. The more buses a mixer has, the more flexible its routing and control capabilities will be.
C
Capsule
The portion of a microphone that converts acoustic energy to electrical energy. Often includes shock mounts, acoustic isolators, protective covers and electronic circuitry in addition to the basic transducer. Also called an element.
Cardioid
A microphone pickup pattern with strong sensitivity to sound presented to the front of the microphone, good but reduced sensitivity to sources on the sides, and good rejection of sound coming from the rear. Cardioid mics are popular for both studio and live use.
Clipping
Clipping occurs in analog and digital audio circuits when the incoming signal exceeds what a particular device can accommodate. Viewed on an oscilloscope, it results in the flattening of the signal peaks, as if the waveform had been “clipped” off. In certain analog circuits light clipping can have a positive effect, producing a pleasing distortion. In digital circuits the general rule is that clipping is to be avoided at all costs, since it produces an unpleasantly harsh sound.
Compression driver
A compression driver is a high frequency speaker or tweeter designed to mount at the rear of an acoustic horn, which amplifies the sound and improves the speaker’s efficiency. The driver’s sound compresses in the horn’s throat and expands with its outward flare.
Compressor
A circuit that performs dynamic compression of an audio signal. By setting the ratio and threshold controls, it’s possible to level out large dynamic swings. For instance, a 2:1 ratio means that if the program material rises by two decibels, the output will only rise by one decibel, once the threshold setting has been exceeded.
Condenser microphone
Type of microphone in which the capsule consists of conductive diaphragm next to a backplate. Condenser mics need power, which can be provided by batteries or a phantom power supply in the mixer. Applying an electric charge basically creates a capacitor out of the capsule. Sound waves hitting the diaphragm cause it to move in relation to the backplate, producing a variation in the capacitance of the capsule. This in turn produces a variance in the output voltage, which can then be turned back into acoustic energy.
Crossover
An electrical device that divides the audio spectrum of an audio signal into smaller groups of frequencies, making it easier for downstream components to handle the load. The most common use of crossovers is in amplifier/speaker systems, which allows the separate components to function more accurately and efficiently.
D
DAW (digital audio workstation)
A computer with the necessary hardware and software to digitize audio for recording, playback and editing.
DSP (digital signal processing)
Any form of manipulation performed on an audio signal while it is in digital form.
D/A converter (DAC)
A digital-to-analog converter takes a digital audio bitstream containing ones and zeros and reconstructs it back into an analog waveform. DACs come in a variety of configurations and prices ranges, and vary in how accurately they can reassemble the program material.
Data compression
The process of making a digital audio or video stream more efficient for storage or transmission by using an algorithm that selectively eliminates bits of data. Examples of audio codecs that use data compression include MP3 and Dolby® Digital.
Decay
The time it takes for a signal to fall below audibility.
Decibel (dB)
A logarithmic unit of measure used to express a ratio of sound power or intensity. In electronics, things like the gains of amplifiers, attenuation of signals, and signal-to-noise ratios are often expressed in decibels. When a signal’s level changes by 10 dB, its power changes by a factor of 10.
Diaphragm
The part of a microphone that is mechanically moved by sound waves. The resulting interaction with a backplate or moving coil (depending on the microphone type) allows the conversion of sound energy to electrical energy.
Direct
A term generally used with guitars and basses, to “go direct” means to plug an instrument directly into a console or recording device without using an amplifier or microphone.
Direct box
Device used to convert high-impedance unbalanced signals from stage instruments (like a bass or keyboard) into low impedance balanced signals suitable for a mixer. It also allows the signal to be carried over long lengths of cable. Often abbreviated DI for “direct insertion.”
Dispersion
The angle of effective coverage for sound radiated from a speaker.
Distortion
Any change in the shape of an audio waveform compared between two points in a signal chain. Generally the term refers to the desirable or undesirable “breaking-up” of audio (as in distorted guitars.)
Dynamic microphone
Dynamic microphones work by having a diaphragm vibrate with the incoming sound to move a voice coil through a magnetic field, creating the electrical output signal. This is the exact opposite of the way a dynamic speaker works. Dynamic mics do not require external power, are physically robust, and can handle very high sound pressure levels (SPLs), making them a popular choice for live sound. Due to their construction, dynamic mics are less sensitive to fast transients and high frequencies than condenser mics, which are often preferred for studio use.
Dynamic range
The ratio of the loudest undistorted signal level to the quietest, expressed in decibels.
E
Equalizer
Hardware device or computer plug-in used to alter the frequency balance of an audio source. An equalizer has the ability to boost or cut specific frequency ranges based around a center frequency. Equalizers come in various forms, including parametric and graphic, active or passive.
Expander
An expander is the opposite of a compressor. Where a compressor takes a given dynamic change and reduces it, an expander increases it, making changes larger.
F
Fader
A type of volume or level control typically found on mixing boards and graphic equalizers. A fader works like a standard potentiometer, only instead of rotating, it slides along a straight path.
Feedback
When a portion of the output signal is intentionally or unintentionally “fed back” into a device’s input. One of the most common forms of feedback is the acoustic feedback that occurs when the sound from a loudspeaker gets picked by the microphone creating the sound, resulting in a squealing or ringing noise.
FOH (Front of House)
This refers to the main mixer for a venue’s a sound system, usually located in the audience, as opposed to the monitor mixer which usually sits to the side of the stage.
Footswitch
Any device that sits on the floor and allows you to change a sound, select a channel, or turn on and off specific effects with your foot.
Frequency
In audio the indication of how many cycles of a repetitive waveform occurs during one second. A waveform which repeats once per second has a frequency of 1Hz (Hertz). When applied to human hearing, frequency is often referred to as pitch.
Frequency response
A measurement of the frequency range that can be handled by an electronic component, loudspeaker, or signal cable.
G
Gain
The extent to which a circuit amplifies a signal. Usually part of an amplifier specification, its value is most often expressed in decibels.
Gain staging
Setting the gain of each stage in the signal path so that one stage doesn’t overload the next one in line.
Gain structure
When multiple audio devices are used together, the gain structure of the system becomes an important consideration for overall sound quality. You have to look at which pieces are amplifying or reducing the signal, and by how much. A properly set up gain structure takes maximum advantage of the dynamic range and signal-to-noise ratio of each piece in the chain.
Graphic equalizer
A type of equalizer that uses a series of slider controls to adjust the frequency bands, and the configuration of the sliders provide a “graphic” visual display of the EQ settings.
Ground
The common reference point for an electrical circuit, at zero voltage potential, that also represents the path for the electric charge to return to the power source.
Ground lift switch
A switch found on some equipment that disconnects the shield of a balanced cable from the local equipment ground. Used in situations where ground loops are a problem.
Ground loop
A common problem that occurs when an audio system has multiple paths and path lengths to ground. Ground loops will cause varying levels of hum, occurring at 60 Hz or some multiple of 60 Hz because that is the line frequency of AC power in the U.S. You can sometimes cure ground loops through the use of ground lift switches, but generally it is better to find the offending piece of equipment and troubleshoot it to find the reason for the ground hum.
H
Harmonic
A harmonic is a sound wave whose frequency is a multiple of the frequency of a reference signal. Complex sounds, such as the human voice or the sound of a musical instrument always consist of a fundamental frequency along with a number of harmonics, which, together form the basic characteristic of that sound. For example, if the fundamental frequency is 25 Hz, the frequencies of the next harmonics are: 50 Hz (2nd harmonic), 75 Hz (3rd harmonic), etc.
Headroom
The difference between the typical level of a signal and the maximum level before the onset of clipping or other distortion. Having lots of headroom ensures that quick bursts of louder sound (transients) will be cleanly reproduced, increasing the overall dynamic range of the system.
Hertz (Hz)
A unit of sound frequency, named after 19th century German physicist Heinrich Hertz. If the waveform of a sound performs one complete cycle in one second’s time, that sound has a frequency of 1 Hertz.
High-pass filter
A filter that attenuates frequencies below a certain cutoff point, while passing on frequencies above the cutoff unaffected. Sometimes called a low-cut filter.
Hypercardioid
A type of microphone pickup pattern. Similar in shape to a cardioid pattern, except that the sides have the greatest amount of rejection, as opposed to a cardioid pattern where the rear of the microphone has the least sensitivity.
I
Impedance
An expression of the opposition that an electronic component, circuit or system offers to AC or DC current. Impedance contains both resistive and reactive components, although generally only the resistive part of the circuit is usually specified as Ohms. The higher the resistance, the higher the impedance.
In-ear monitor (IEM)
Earbud-like devices used by musicians and sound engineers to listen to music mixes of vocals and stage instrumentation for live performance or recording studio mixing. The most common professional stage in-ear monitors use a wireless system to send the mix to the IEMs.
Insert
A point in the signal path of a circuit where it is possible to interrupt the signal and “insert” another signal. This allows for the introduction of a piece of external equipment, so that the original signal now flows into and is processed by the external equipment before being returned back into the original circuit. Inserts are typically found on mixers, and some common applications include applying compression, noise gating, or EQ to a particular channel without affecting any other channels. An insert may also be called a “patch” or “injection point.”
Interface
A device that acts as an intermediary between two or more pieces of equipment. An audio interface for a computer allows signals generated by a preamplifier for example, to be communicated to the computer software.
J
Jitter
Jitter is the undesired deviation of some aspect of the pulses in a digital signal. Jitter can be introduced into a digital audio system at many points, including the analog-to-digital converter and digital-to-analog converter. These pulses have to maintain very precise timing, and any departure from the reference clock will cause timing jitter. The effects of jitter can be heard as low level distortion or noise, and can compromise other sonic aspects such as imaging.
K
Kilohertz (kHz)
One thousand Hertz.
L
Large diaphragm
Refers to the size of the diaphragm in a microphone. Microphones with 3/4″ or larger diaphragms are considered to be large diaphragm microphones. Large diaphragm mics are generally more sensitive than small or medium diaphragm mics because of the increased surface area. Large diaphragm mics produce a comparatively “big” sound that is favored by many engineers for vocals.
Latency
Latency refers to unwanted time delays in audio production between when a signal enters a device or program and when it emerges. It’s a common issue for digital audio workstations, where input signals must be converted to digital and then processed before reaching the monitoring stage.
Lavalier
A lavalier microphone (also known as a lapel mic or personal mic) is a small microphone that provides hands-free operation for television, theater, and public speaking applications. These mics usually include small clips for attaching to collars, ties, or other clothing. The cord may be hidden by clothes and either run to a radio frequency transmitter that is kept in a pocket or clipped to a belt, or routed directly to the mixer or recording device.
Line level
Generally applies to the two line level references: balanced and unbalanced. Balanced or professional equipment operates at +4dBm or 1.23 volts, while unbalanced or consumer equipment operates at -10dBV or 0.32 volts. If two pieces of equipment need to be connected that use different line levels, then matching transformers should be used to equalize the levels. Otherwise the +4dBm signal will overdrive an -10dBV input and equally a -10dBV signal will
M
MIDI (Musical Instrument Digital Interface)
MIDI can be used to transmit almost every aspect of a musical performance. MIDI data is instructions about how a sound will be produced, not the actual sound itself. So, data sent from one device to another could be played with a piano sound while the original information was actually a drum sequence. MIDI has expanded beyond strictly music and can be used for lighting cues among other applications. Apart from its ubiquity, MIDI’s main advantage is that file sizes are relatively small compared to what an actual audio file would be. MIDI connections are made via a five-pin DIN connector.
MP3
Officially known as MPEG-1 Audio Layer 3, MP3 is a form of lossy data compression that can be used to create audio files that are fairly faithful to the original CD file while using only a fraction of the storage space. The MP3 codec relies on perceptual audio coding to remove audio content that our ears have trouble hearing anyway. MP3 is a popular format for streaming music services, and is compatible with most portable music players.
Microphone
A microphone is a transducer which picks up sound waves and converts them into electric current for the purpose of transmitting or recording sound.
Microphone level
The signal level generated by a microphone, typically ranging between 0.001 to 0.005 volts. To make it usable for recording, the signal requires a microphone preamp to boost the signal up to line level.
Microphone preamp
A circuit, stand-alone device, or section of a device designed to amplify the low-voltage signal from a microphone up to standard line level. Microphone preamps are often built into mixers and audio interfaces.
A modern digital mixer that uses an iPad® as a control surface.
Mixer
Any device that can take two or more audio signals and mix them down to a single mono or stereo signal. Although this happens on large consoles in professional studios, home studios can achieve surprisingly professional results using digital audio workstations, which combine recording, editing, and mixing functions.
Monitor
A highly accurate loudspeaker designed for recording and mixing use. Monitors come in a variety of shapes, sizes, and configurations, and can be passive (requiring an amplifier) or active (built-in amplifiers).
Mono
Mono is short for monaural, which means only one audio channel, as opposed to stereo, which means two channels (usually a left and a right).
N
Near-field
Generally describes a loudspeaker system that is designed to be close to the monitoring position. In this way the listener receives more of the direct sound from the speakers, while minimizing the effect of sound produced by reflections from walls, floors and ceilings.
Noise floor
The amount of self-noise generated by a piece of electronic equipment when no signal is present. Minimizing the noise floor leads to expanded dynamic range, and cleaner recordings or sound production.
O
Off-axis
Term used to describe the position of a sound source in reference to the microphone recording the source. Generally, a microphone will record best when the source is directly in front of it.
Ohm
A unit of electrical resistance. Named for its discoverer, Georg Ohm.
Open mic
A microphone that is turned on and turned up, and ready to be used.
P
PA system
Short for “public address” system, which is any sound system used to amplify speech or music. This can range from someone giving a speech in an auditorium to a band playing on a stage. A PA system may comprise a mixer, amplifier(s), speaker(s), various types of signal processors, and more.
Microphone with 3-position switchable attenuation pad.
Pad
A circuit designed to attenuate the output of a device by a given amount. For example, some microphones have so much output that they can overdrive the input stage of many mic preamps. To prevent this, mics often include a switchable “pad” on the output stage of the mic that reduces the mic’s output by 10 or 20 dB. Some devices have built-in pads, but it is also possible to purchase external pads, which plug in to a device’s output and reduce its level.
Pan
To pan means to move the perceived location of a sound source within a stereo soundstage. Generally works by reducing or making louder the particular sound source in either the left or right channel of a stereo output. If a source is panned hard left, then it will appear at only the left speaker, and likewise with the right side. The amounts of signal present in both speakers will determine the exact location of the sound source in between the left and right sides in the stereo field.
Parametric equalizer
An equalizer whose filters contain controls over three parameters: frequency, gain/cut, and “Q,” which refers to a measure of the sharpness of the resonant peak. In other words, with a narrow Q, gain or cut affects fewer frequencies adjoining the center frequency, while a wide Q will affect a greater number of adjoining frequencies.
Passive
A passive audio device doesn’t have built-in power, as opposed to an active device, which does. Typical passive devices include equalizers, crossovers, and speakers.
Peak
The maximum instantaneous level of a signal. When a signal peaks beyond what a circuit can handle, distortion results.
Phantom power
DC voltage, usually 48V that is supplied to devices with active electronics using a standard balanced microphone cable. Common devices requiring phantom power include condenser microphones and direct boxes. Since the power is carried on the same wires that carry the audio signal, and since most dynamic microphones and other passive devices are not affected by this DC voltage, it became known as “phantom” power. Most mixer consoles and preamplifiers provide phantom power.
Phase
Sound is made up of waves, and when you’re dealing with more than a single sound source – say, recording a source using two channels – the sound waves have to stay in sync or some of the sonic energy will be canceled. This is known as phase cancellation. A complete waveform is 360 degrees. If you have two identical waveforms and one is 180 degrees out of phase, the result will be total cancellation – silence. When capturing audio with multiple microphones, even a small delay on one mic can put the summed audio out of phase.
Phone plug
A 1/4″ connector common to pro audio equipment. Generally available in two varieties: unbalanced or TS, and balanced or TRS, where T stands for tip, R for ring and S for sleeve.
Phono plug
A type of coaxial audio connector found more often on consumer equipment than pro gear. In addition to the ubiquitous red and white analog stereo jacks and plugs found on turntables, CD players, and receivers, coaxial cables with phono plugs can be used to carry digital audio. Phono plugs are often referred to as RCA connectors.
Polarity
Polarity is often mistakenly used interchangeably with phase, but they’re two different concepts. Phase implies a relationship with time, polarity does not. So, two signals with reversed polarity are not the same as two signals being 180 degrees out of phase, although the results can be similar. What most engineers, consoles and preamps refer to as a “phase” switch is actually a switch reversing polarity.
Potentiometer
An electronic component used to provide variable control over an electronic circuit. Potentiometers are often used as volume controls on audio equipment – picture the typical rotary knob volume control. A potentiometer is often called a “pot” for short.
Preamplifier
An electronic device used to amplify low-level signals, like those from microphones, before they are fed to subsequent gain stages or devices.
Proximity effect
Refers to the effect caused by a sound source being very close to a directional microphone. The net result is that low frequencies are boosted as the source comes closer.
Pumping
An artifact introduced into an audio source that is caused by excessive dynamic compression. Pumping, also known as breathing, causes the program level to rise and fall depending on some frequency that is crossing the threshold
Q
R
Rack space
An industry standard measurement for equipment intended to be mounted into racks. The width must be 19″, while the height must be 1-3/4″ or some multiple thereof. As an example, equipment height might be specified as 3 rack spaces or 3U high. There is no specification for depth.
Real time analyzer (RTA)
A professional audio device which measures and displays the frequency spectrum of an audio signal in real time. It uses a number of narrow bandwidth filters connected to a display to give a visual indication of the amplitude in each frequency band. The input signal can be provided by a built-in microphone or by a PA system. RTAs are often used by sound engineers and acousticians when installing audio systems in all kinds of listening spaces: Venues, home theaters, cars, etc.
Reverb
The sonic effect a room adds to direct sound – echoes, reflections, diffusions, and absorptions due to the room’s size, shape, material, and furnishings – is called reverberation. A reverb unit (or plug-in) electronically mimics those effects, creating a sense of space, and often giving the sound a pleasing timbre and depth.
S
Sample (and sampling rate)
When an analog-to-digital converter captures the instantaneous amplitude of a sound source, it creates a sample. When a series of amplitude values are captured at periodic intervals, the rate is known as a “sampling rate.” For example, the standard sampling rate for CD audio is 44.1kHz or 44,100 samples per second.
Send
An output on an audio device used for routing signal to an external device, such as a reverb, delay, or other processor. Typically, sends are paired with returns, which accept the signal coming back from the output of the processor.
Shotgun microphone
A type of microphone with a long body and a series of holes running along the sides. The polar pattern characteristic is highly directional, with strong rejection of side and rear sources. Useful for picking up sounds at a distance, but also for pinpointing certain sources while ignoring much of the ambient or surrounding noise.
Sibilance
A high- frequency component of certain vocal sounds, especially “s” and “sh” that can cause problems while recording. A de-esser is a type of processor specifically designed to dynamically correct this problem without affecting the main vocal content too much.
Snake
A type of cabling where multiple lines are enclosed in a larger single shield. The most common use for a snake is for live sound, where microphone leads and monitor mixes are sent back and forth between the front of house mixer and the stage. Snakes are also used in recording studios.
Sound pressure level (SPL)
A standard measurement of the acoustic volume or loudness of sound, expressed in decibels (dB).
Speakon® connector
A type of multi-pin connector developed by Neutrik® and found on many power amplifiers and speakers used for PA applications. Besides providing a very reliable connection, Speakon cables are intended solely for use in high-current audio applications. There’s no way to confuse them with low-voltage microphone or instrument cables that use 1/4″ or XLR connectors. Standard Speakon connectors come in four- or eight-conductor versions.
Stage monitor
A speaker that is typically placed within and pointed at the performance area to help the performer(s) on stage to hear how they sound. By contrast, a PA speaker produces sound intended for the audience.
Standing waves
Standing waves occur when the sound from your speakers is reflected back and forth between the parallel surfaces in your room: the side walls, the front and rear wall, and the floor and ceiling. This effect amplifies some frequencies while canceling others out, creating areas of differing sound pressure or loudness around your room.
T
TRS (Tip, Ring and Sleeve)
A type of 1/4″ phone plug used in a variety of audio applications. Common uses include connecting balanced equipment (where the TRS plug has a positive, negative, and ground connection), or stereo unbalanced equipment (left and right are on the Tip and Ring, with a common ground) like headphones.
TS (Tip, Sleeve)
A type of 1/4″ phone plug used for unbalanced connections.
Timbre
Pronounced “tamber,” it is the characteristic quality of sound produced by a particular instrument or voice. An oboe has a different timbre than a violin, which is why they sound different when playing the same note. Timbre is made up of all of the qualities of a sound: frequency, harmonic content, transient attack, and more.
Transducer
A device that converts energy from one form to another. Some examples of audio transducers: A microphone converts acoustic sound into electric current; by contrast, a loudspeaker converts electric current back into acoustic sound.
U
USB (Universal Serial Bus)
A standard for interconnecting computers and peripherals. USB is a plug-and-play interface found on both Windows® and Apple® computers. It allows new devices to be configured automatically upon attachment without the need to reboot, run setups, or add adapter cards.
Unbalanced signal
To pass an electrical signal through a wire requires two conductors. In unbalanced circuits, one conductor carries both signal and supplies ground, unlike in balanced connections, which have a third wire dedicated to ground. For this reason, unbalanced circuits are less expensive to produce, but the down side is the cables are susceptible to noise, especially with longer cable lengths.
Unity gain
A device or setting which does not amplify or attenuate the signal is said to be at “unity gain.” Many processors are set up for unity gain; that is, they can be plugged into a system without changing its overall levels. In practice, unity gain is often a desired setting for maintaining gain staging, and for minimizing distortion and feedback.
V
Voltage
Voltage is an electric charge, or potential, between two points, one being of higher relative voltage than the other is. The unit of measurement is called the “volt.” If you think of electricity as a flow of water, voltage can be thought of as the pressure, while current (amperage) would be the water volume.
W
WAV
Short for Waveform Audio File Format, WAV is the standard for storing an audio bitstream on Windows-based PCs. Although a WAV file can hold compressed audio, the most common WAV format contains uncompressed audio in PCM format.
Watt
A metric unit of power defined as one Joule per second. The watt has become a common term in audio used to describe the power handling capabilities and/or requirements of speakers, and the power delivery capabilities of amplifiers.
White noise
A sound that contains every frequency within the range of human hearing in equal amounts.
X
XLR
The name for a type of audio connector used for sending balanced signals and microphone feeds. An XLR connector consists of three pins housed in a barrel and often having locking components. The male side is for sends, and the female is always a receiving connector.
Y
Y cable
A cable used to split or combine two signals. Another use is to send a signal out of one side of the “Y” and return through the other, as when patching into an insert point of a console.
Z
Zipper noise
An audio artifact resembling distortion that is sometimes heard from inexpensive digital devices when changing certain parameters. It is caused by quantization, where under digital control changing values are spaced apart and stepped, as opposed to the analog domain, where such changes are continuous. It becomes noticeable when the resolution of the digital control signal being used to change the parameter is too coarse to avoid audible stepping between successive levels.